Shocker Air Receiver Hitch System
12,000lb Rated towing capacity
1,200lb tongue weight
Improves ride and reduces wear and tear
Includes 2” and 2-5/16” Combo ball
Adjustable height: 1/2” to 3-1/2” drop
Filters road shock through built in air bag and cushions ride
Rocker arm pivot design that produces a down and back motion
Shock dampening action
Made in the USA
Note: A Shocker with 2″ shank will not fit a 2-1/2″ receiver even with a sleeve. This is because trucks with a 2-1/2″ hitch have a deeper frame & the hitch that fits 2-1/2″ receiver is slightly deeper. However a Shocker with 2-1/2″ shank will fit a 3″ receiver with sleeve.
Note: Always use a good hitch ball with the proper recommended tow weight.
Safety Notice: The Shocker Hitch is a heavy-duty unit that in most cases exceeds factory receiver hitch weight capacities, therefore it is imperative that you always read and follow the tongue and towing weight recommendations of the receiver hitch that is mounted on your tow vehicle.
Additional Set Up Notes:
- When towing heavy trailers or trailers with high wind resistance it may be necessary to increase air pressure in the Shocker.
- It is highly recommended that the hitch ball be greased to reduce wear and improve shocker action.
- DO NOT TIGHTEN THE TOP BOLT, IT IS A LIMITER STOP ONLY.
Maximum Air Pressure: Do not exceed 100 psi in the air bag, as it may damage the air bag.